Windows 2016 dns ptr records not updating
If so, your DHCP server may not be configured to auto-register their IP with the DNS server.
1a) Even if these are enabled, you might need to make sure the DHCP server has permissions to update DNS records. The forward DNS entries ("A" records) for windows machines on the domain are populated automatically.However, the reverse DNS entries ("PTR" Records) are not.The reverse lookup zone exists, and I can add entries to it manually, but it doesn't automatically populate.Dynamic updates are enabled for both the forward and reverse zones. This could be due to a couple of different things: 1) Are your clients obtaining IPs via a Windows DHCP Server?Make sure the reverse zone is AD-Integrated and also check the Zone Transfers tab and make sure they are allowed (generally Only to servers listed on the Name Servers tab).
Also make sure your DNS server are listed on the Name Servers tab. Ok so given that your DHCP server is not registering the records on behalf of the clients, and aside from your windows clients not being set to register with DNS on their NICs (which you should verify in TCP/IP properties on the client NIC), I would check the security settings on your reverse zone to make sure clients are allowed to register in the reverse zone.
This article covers the default security settings for DNS zones: the settings are jacked up (or even if they are fine), you might try just blowing away the reverse zone and recreating it since you basically have a non-functioning reverse zone as it is...
If your DHCP server is also a domain controller, then you are probably fine, if not, then you may want to see if the DHCP server is a member of the "Dns Update Proxy" group in AD.
Then check the Security tab on the Reverse Zone and make sure that group is authorized to create all child objects (DNS records) 2) If your statically-configured hosts are not updating the reverse zone, make sure their NICs are configured to register their IP in DNS (Windows hosts are enabled for this by default).
If they are in the forward zone but not the reverse, then something else is going on...
3) If the issue is that your reverse zones are mismatched between domain controllers (meaning a host was able to register with one of the DCs, but the registration did not get replicated to the others) it could mean the zones themselves aren't replicating between domain controllers.